NEO PRIME SERIES

NEO Prime Series – Specifications

MODEL	UNIT	900-280			900-280			900-420			900-420
CLAMPING UNIT
Clamp Force	TON	90			90			90			90
Clamp Stroke	MM	340			340			340			340
Min. Mould Height	MM	150			150			150			150
Max. Mould Height	MM	400			400			400			400
Max. Daylight	MM	740			740			740			740
Dist. Bet. Tiebar	MM	370X370			370X370			370X370			370X370
Platen Size	MM	555X555			555X555			555X555			555X555
Ejector Stroke	MM	85			85			85			85
Ejector Force	TON	4.9			4.9			4.9			4.9
INJECTION UNIT
Screw Size	MM	30	35	40	30	35	40	35	40	45	35	40	45
L/D Ratio		26.6	22.8	20	26.6	22.8	20	25.7	22.5	20	25.7	22.5	20
Screw Stroke	MM	150	150	150	150	150	150	175	175	175	175	175	175
Inj. Capacity (GPPS)	GMS	100	137	178	100	137	178	160	209	264	160	209	264
Inj. Pressure Max.	BAR	2666	1960	1500	2666	1960	1500	2509	1919	1517	2509	1919	1517
Theoretical Displacement	CC	106	144	188	106	144	188	168	219	278	168	219	278
Inj. Rate	CC/SEC	64	87	113	100	136	177	67	88	112	105	138	175
Heating Capacity	KW	6.5	6.5	6.5	6.5	6.5	6.5	8.5	8.5	8.5	8.5	8.5	8.5
No. of Heating Zone (Barrel + Nozzle)		4+1	4+1	4+1	4+1	4+1	4+1	4+1	4+1	4+1	4+1	4+1	4+1
Nozzle Contact Force	TON	3	3	3	3	3	3	3	3	3	3	3	3
GENERAL DATA
Motor Power / Servo Motor	KW	9.3/11.6			14.9/20.4			9.3/11.6			14.9/20.4
Total Connected Load	KW	15.8			21.4			17.8			23.4
Total Oil Capacity	LITER	250			250			250			250
Machine Dimension (LxWxH)	MM	4600X1350X2000			4600X1350X2000			4600X1350X2000			4600X1350X2000
Machine Weight	KGS	3100			3100			3150			3150

MODEL	UNIT	1100-280			1100-280			1100-420			1100-420			1100-635
CLAMPING UNIT
Clamp Force	TON	110			110			110			110			110
Clamp Stroke	MM	380			380			380			380			380
Min. Mould Height	MM	150			150			150			150			150
Max. Mould Height	MM	450			450			450			450			450
Max. Daylight	MM	830			830			830			830			830
Dist. Bet. Tiebar	MM	410 X 410			410 X 410			410 X 410			410 X 410			410 X 410
Platen Size	MM	605 X 605			605 X 605			605 X 605			605 X 605			605 X 605
Ejector Stroke	MM	100			100			100			100			100
Ejector Force	TON	4.9			4.9			4.9			4.9			4.9
INJECTION UNIT
Screw Size	MM	30	35	40	30	35	40	35	40	45	35	40	45	40	45	50
L/D Ratio		26.6	22.8	20	26.6	22.8	20	25.7	22.5	20	25.7	22.5	20	25	22.2	20
Screw Stroke	MM	150	150	150	150	150	150	175	175	175	175	175	175	210	210	210
Inj. Capacity (GPPS)	GMS	100	137	178	100	137	178	160	209	264	160	209	264	251	317	392
Inj. Pressure Max.	BAR	2666	1960	1500	2666	1960	1500	2509	1919	1517	2509	1919	1517	2405	1900	1539
Theoretical Displacement	CC	106	144	188	106	144	188	168	219	278	168	219	278	263	333	412
Inj. Rate	CC/SEC	64	87	113	100	136	177	67	88	112	105	138	175	111	140	173
Heating Capacity	KW	6.5	6.5	6.5	6.5	6.5	6.5	8.5	8.5	8.5	8.5	8.5	8.5	10.5	10.5	10.5
No. of Heating Zone (Barrel + Nozzle)		4+1	4+1	4+1	4+1	4+1	4+1	4+1	4+1	4+1	4+1	4+1	4+1	4+1	4+1	4+1
Nozzle Contact Force	TON	3	3	3	3	3	3	3	3	3	3	3	3	3	3	3
GENERAL DATA
Motor Power / Servo Motor	KW	9.3/11.6			14.9/20.4			9.3/11.6			14.9/20.4			14.9/20.4
Total Connected Load	KW	15.8			21.4			17.8			23.4			25.4
Total Oil Capacity	LITER	300			300			300			300			300
Machine Dimension (LxWxH)	MM	4800X1400X2050			4800X1400X2050			4800X1400X2050			4800X1400X2050			4800X1400X2050
Machine Weight	KGS	3950			3950			4000			4000			4100

MODEL	UNIT	1400-420			1400-420			1400-635			1400-635			1400-905
CLAMPING UNIT
Clamp Force	TON	140			140			140			140			140
Clamp Stroke	MM	420			420			420			420			420
Min. Mould Height	MM	200			200			200			200			200
Max. Mould Height	MM	500			500			500			500			500
Max. Daylight	MM	920			920			920			920			920
Dist. Bet. Tiebar	MM	450 X 450			450 X 450			450 X 450			450 X 450			450 X 450
Platen Size	MM	665 X 665			665 X 665			665 X 665			665 X 665			665 X 665
Ejector Stroke	MM	120			120			120			120			120
Ejector Force	TON	4.9			4.9			4.9			4.9			4.9
INJECTION UNIT
Screw Size	MM	35	40	45	35	40	45	40	45	50	40	45	50	45	50	60
L/D Ratio		25.7	22.5	20	25.7	22.5	20	25	22.2	20	25	22.2	20	26.7	24	20
Screw Stroke	MM	175	175	175	175	175	175	210	210	210	210	210	210	245	245	245
Inj. Capacity (GPPS)	GMS	160	209	264	160	209	264	251	317	392	251	317	392	370	457	658
Inj. Pressure Max.	BAR	2509	1919	1517	2509	1919	1517	2405	1900	1539	2405	1900	1539	2323	1882	1316
Theoretical Displacement	CC	168	219	278	168	219	278	263	333	412	263	333	412	389	480	692
Inj. Rate	CC/SEC	67	88	112	105	138	175	111	140	173	155	197	243	114	140	202
Heating Capacity	KW	8.5	8.5	8.5	8.5	8.5	8.5	10.5	10.5	10.5	10.5	10.5	10.5	13.5	13.5	13.5
No. of Heating Zone (Barrel + Nozzle)		4+1	4+1	4+1	4+1	4+1	4+1	4+1	4+1	4+1	4+1	4+1	4+1	4+1	4+1	4+1
Nozzle Contact Force	TON	3	3	3	3	3	3	3	3	3	3	3	3	3	3	3
GENERAL DATA
Motor Power / Servo Motor	KW	9.3/11.6			14.9/20.4			14.9/20.4			22.3/28.7			14.9/20.4
Total Connected Load	KW	17.8			23.4			25.4			32.8			28.4
Total Oil Capacity	LITER	350			350			350			350			350
Machine Dimension (LxWxH)	MM	5000X1450X2100			5000X1450X2100			5000X1450X2100			5000X1450X2100			5000X1450X2100
Machine Weight	KGS	4750			4750			4850			4850			5000

MODEL	UNIT	1700-635			1700-635			1700-905			1700-905			1700-1520
CLAMPING UNIT
Clamp Force	TON	170			170			170			170			170
Clamp Stroke	MM	460			460			460			460			460
Min. Mould Height	MM	220			220			220			220			220
Max. Mould Height	MM	550			550			550			550			550
Max. Daylight	MM	1010			1010			1010			1010			1010
Dist. Bet. Tiebar	MM	490 X 490			490 X 490			490 X 490			490 X 490			490 X 490
Platen Size	MM	725 X 725			725 X 725			725 X 725			725 X 725			725 X 725
Ejector Stroke	MM	130			130			130			130			130
Ejector Force	TON	6.1			6.1			6.1			6.1			6.1
INJECTION UNIT
Screw Size	MM	40	45	50	40	45	50	45	50	60	45	50	60	50	60	70
L/D Ratio		25	22.2	20	25	22.2	20	26.7	24	20	26.7	24	20	28	23.3	20
Screw Stroke	MM	210	210	210	210	210	210	245	245	245	245	245	245	280	280	280
Inj. Capacity (GPPS)	GMS	251	317	392	251	317	392	370	457	658	370	457	658	522	752	1023
Inj. Pressure Max.	BAR	2405	1900	1539	2405	1900	1539	2323	1882	1316	2323	1882	1316	2813	1953	1435
Theoretical Displacement	CC	263	333	412	263	333	412	389	480	692	389	480	692	549	791	1077
Inj. Rate	CC/SEC	111	140	173	155	197	243	114	140	202	159	197	284	132	191	260
Heating Capacity	KW	10.5	10.5	10.5	10.5	10.5	10.5	13.5	13.5	13.5	13.5	13.5	13.5	21	21	21
No. of Heating Zone (Barrel + Nozzle)		4+1	4+1	4+1	4+1	4+1	4+1	4+1	4+1	4+1	4+1	4+1	4+1	5+1	5+1	5+1
Nozzle Contact Force	TON	3	3	3	3	3	3	3	3	3	3	3	3	3	3	3
GENERAL DATA
Motor Power / Servo Motor	KW	14.9/20.4			22.3/28.7			14.9/20.4			22.3/28.7			22.3/28.7
Total Connected Load	KW	25.4			32.8			28.4			35.8			43.3
Total Oil Capacity	LITER	400			400			400			400			400
Machine Dimension (LxWxH)	MM	5300X1525X2150			5300X1525X2150			5300X1525X2150			5300X1525X2150			5300X1525X2150
Machine Weight	KGS	5650			5650			5800			5800			5950

MODEL	UNIT	2000-905			2000-905			2000-1520			2000-1520			2000-2350
CLAMPING UNIT
Clamp Force	TON	200			200			200			200			200
Clamp Stroke	MM	510			510			510			510			510
Min. Mould Height	MM	225			225			225			225			225
Max. Mould Height	MM	600			600			600			600			600
Max. Daylight	MM	1110			1110			1110			1110			1110
Dist. Bet. Tiebar	MM	540 X 540			540 X 540			540 X 540			540 X 540			540 X 540
Platen Size	MM	790 X 790			790 X 790			790 X 790			790 X 790			790 X 790
Ejector Stroke	MM	150			150			150			150			150
Ejector Force	TON	6.1			6.1			6.1			6.1			6.1
INJECTION UNIT
Screw Size	MM	45	50	60	45	50	60	50	60	70	50	60	70	60	70	80
L/D Ratio		26.7	24	20	26.7	24	20	28	23.3	20	28	23.3	20	26.6	22.8	20
Screw Stroke	MM	245	245	245	245	245	245	280	280	280	280	280	280	315	315	315
Inj. Capacity (GPPS)	GMS	370	457	658	370	457	658	522	752	1023	522	752	1023	846	1151	1503
Inj. Pressure Max.	BAR	2323	1882	1316	2323	1882	1316	2813	1953	1435	2813	1953	1435	2640	1940	1485
Theoretical Displacement	CC	389	480	692	389	480	692	549	791	1077	549	791	1077	890	1211	1582
Inj. Rate	CC/SEC	114	140	202	159	197	284	132	191	260	170	245	334	181	247	323
Heating Capacity	KW	13.5	13.5	13.5	13.5	13.5	13.5	21	21	21	21	21	21	24	24	24
No. of Heating Zone (Barrel + Nozzle)		4+1	4+1	4+1	4+1	4+1	4+1	5+1	5+1	5+1	5+1	5+1	5+1	5+1	5+1	5+1
Nozzle Contact Force	TON	3	3	3	3	3	3	3	3	3	3	3	3	3	3	3
GENERAL DATA
Motor Power / Servo Motor	KW	14.9/20.4			22.3/28.7			22.3/28.7			29.8/36.7			29.8/36.7
Total Connected Load	KW	28.4			35.8			43.3			50.8			53.8
Total Oil Capacity	LITER	500			500			500			500			500
Machine Dimension (LxWxH)	MM	5900X1575X2350			5900X1575X2350			5900X1575X2350			5900X1575X2350			5900X1575X2350
Machine Weight	KGS	6500			6500			6650			6650			6850

Let’s work together!
Just drop us a line - info@xmpl.com